Setting up Rainbow Vacuum and how to use it
You got your Rainbow and need to know how to start using it? Don’t worry this post will help you to set your Rainbow vacuum.
Filling Water basin up to the right level
Fill the Rainbow with water up to the right level is very important. If you fill the Rainbow with less water than required, the Rainbow will reduce the capacity to trap more dust and dirt.
More water than normal can make the rainbow go off by itself to prevent water spills.
Fill the Rainbow up to the middle of the water basin where the filling mark is. The same level is flush with water basin middle dome.
How to lock the water basin in place
Use the two side locks the Rainbow vacuum has in order to lock the water tank in place.
If you do not lock the water tank correctly the Rainbow suction can leak therefore reducing the efficiency of the Rainbow.
Set the Rainbow in the wheels
The correct sequence is:
- Lock the water tank in the Rainbow Vacuum
- Then put the Rainbow into the dolly
Be sure to align correctly the Rainbow with the wheels so the dolly can lock correctly
Connect the Rainbow hose correctly
There are two different types of Rainbow hose, the regular and the electrical one. Any Rainbow hose needs to be attached to the intake hole, with the looking tabs facing left and right not up and down (look the video for more reference).
The electrical hose has an electrical connection in the hose end where it is connecting to the Rainbow, so you will need to open a little window in the intake face of the Rainbow in order to connect the electrical plug in addition to the side locking tabs.
Setting the Rainbow Video in English
Setting the Rainbow Video in Spanish
If you have any additional comment, please use the form below to share your thoughts so everybody can take advance of it, or you can personally contact us.
Please share this post ↓ if you think this could be useful to your friends.